Acids and Bases - Buffer Action (A-Level Chemistry)

Buffer Action

Buffer Solutions

A buffer is a solution which can resist small changes in pH, restoring the pH to its original value.

Buffers only work when small amounts of acid or base are added: if large amounts are added then the buffer cannot cope and the pH will change significantly.

Buffers are commonly used in shampoos and biological washing powders.

 

Acidic Buffer Solutions

Acidic Buffers

An acidic buffer is made by adding a weak acid to a solution of one of its salts (its conjugate base) like for example, ethanoic acid and sodium ethanoate

 

The ethanoic acid is a weak acid and partially ionises setting up an equilibrium:

CH₃COOH(aq) ⇌ CH₃COO⁻  (aq) + H⁺(aq)

The salt fully ionises:

CH₃COONa → CH₃COO⁻ (aq) + Na⁺(aq)

The buffer solution contains lots of undissociated acid molecules and lots of salt ions of the acid from the salt solution, and enough H+ ions so that the solution is acidic.

 

Calculating pH of Acidic Buffer Solutions

For calculating the pH of a buffer solution you need the Ka of the acid in the buffer and the concentrations of both the acid and its salt. The following assumptions have to be made:

  • Equilibrium and initial concentrations of the conjugate base are the same. The salt is assumed to dissociate fully.
  • Equilibrium and initial concentrations of the weak acid are the same. The acid only dissociates slightly.

 

Worked Example: A buffer solution contains 0.05 mol of sodium ethanoate in a solution of 750 cm³ of 0.0500 mol dm⁻³ ethanoic acid. The solution is at 298 K.
Calculate the pH of the buffer solution formed (3 marks).
Ka of ethanoic acid at 298K = 1.76 x 10⁻⁵ mol dm⁻³

Step 1: Calculate the concentration ethanoate ions (1 mark)

Concentration of ethanoate ions = moles/ volume = 0.05/(750/1000) = 0.06 mol dm⁻³

 

Step 2: Calculate the H⁺ ion concentration using Ka (1 mark)

Rearrange and substitute in values to find [H⁺]

 

Step 3: Calculate pH (1 mark)

 

Making a Buffer of a given pH

In order to work out the concentrations of salt and acid that have to be mixed in order to make a buffer of a specific pH, you just have to use the Henderson-Hasselbach equation:

Buffer Action
Buffer Action

 

Worked Example: A buffer solution containing 1.20 mol dm⁻³ of sodium ethanoate salt and an unknown concentration of ethanoic acid is found to have a pH of 4.9 at 298K. What is the concentration of ethnic acid in the buffer solution?
Ka of ethanoic acid at 298K = 1.76 x 10⁻⁵ mol dm⁻³

Step 1: Calculate pKa of ethanoic acid (1 mark)

 

Step 2: Substitute the known values into the Henderson-Hasselbach equation (1 mark)

 

Step 3: Rearrange the equation to find the unknown value (1 mark)

 

Adding an Acid to an Acidic Buffer

When H⁺ ions are added to the acid buffer, they combine with some of the large quantity of ethanoate ions to make more undissociated acid molecules.

H⁺ (aq) + CH₃COO⁻ (aq) → CH₃COOH(l)

As a result:

  • The amount of salt ions decreases. Excess ethanoate combine with the extra H⁺ to form undissociated ethnic acid.
  • The amount of undissociated acid increases. A H+ combines with ethanoate ions, more undissociated ethnic acid forms.
  • The pH stays more or less the same. The extra H⁺ added immediately combine with the ethanoate ions and so the pH hardly changes.
Buffer Action
Buffer Action

 

Worked Example: A buffer solution contains 0.05 mol of sodium ethanoate in a solution of 750 cm³ of 0.0500 mol dm⁻³ ethanoic acid. The solution is at 298 K. 7.5 cm³ of 2 mol dm⁻³ of hydrochloric acid is added to this buffer solution. Calculate the pH of the solution formed. (5 marks)
Ka of ethanoic acid at 298K = 1.76 x 10⁻⁵ mol dm⁻³

Answer:

Step 1: Calculate the moles of hydrochloric and ethanoic acids (1 mark)

Moles of hydrochloric acid = 7.5/1000 x 2 = 0.015 mol
Moles of ethanoic acid = 750/1000 x 0.05 = 0.0375 mol

 

Step 2: Calculate the moles of ethanoate ions after the addition of HCl (1 mark)

When H⁺ ions are added to the buffer, they react with some of the ethanoate ions from the salt solution:

H⁺(aq) + CH3COO⁻ (aq) → CH3COOH (l) – equation 1

The mole ratio of H⁺ : CH3COO- = 1:1

Ethanoate ions are used up in the reaction, and decrease by the same number of moles of acid added.

Moles of ethanoate ions = 0.05 – 0.015 = 0.035 mol

 

Step 3: Calculate the new moles of ethanoic acid molecules (1 mark)

More ethanoic acid is made when H⁺ ions are added.
Mole ratio of CH3COOH: H⁺ = 1:1 from equation 1
Moles of ethanoic acid = 0.0375 + 0.015 = 0.05 mol

 

Step 4: Calculate the H⁺ ion concentration using Ka (1 mark)

Rearrange and substitute in values to find [H⁺]

 

Step 5: Calculate pH (1 mark)

 

Adding a Base to an Acidic Buffer

When OH- ions are added to an acidic buffer, they react with the H+ ions produced from the dissociated acid molecules. As the H+ ions are used up, the equilibrium shifts to the right.

For example with an ethanoic acid and ethanoate ion buffer:

As a result:

  • The amount of undissociated acid decreases. As the position of equilibrium shifts, more undissociated acid is dissociated to replace the H⁺ ions
  • The amount of salt ions increases. As more undissociated acid is dissociated to replace the H⁺ ions, more ethanoate ions are produced.
  • The pH stays more or less the same. The extra OH- added immediately combine with the H⁺ ions in solution, which are quickly replenished as the position of equilibrium shifts to the right.

 

Worked Example: A buffer solution contains 0.05 mol of sodium ethanoate in a solution of 750 cm³ of 0.0500 mol dm⁻³ ethanoic acid. The solution is at 298 K.
7.5 cm³ of 2 mol dm⁻³ of sodium hydroxide is added to this buffer
solution. Calculate the pH of the solution formed. (5 marks)
Ka of ethanoic acid at 298K = 1.76 x 10⁻⁵ mol dm⁻³

Answer:

Step 1: Calculate the moles of sodium hydroxide (1) and initial moles of ethanoic acid (1 mark)

Moles of sodium hydroxide = 7.5/1000 x 2 = 0.015 mol
Moles ethanoic acid = 750/1000 x 0.05 = 0.0375 mol

 

Step 2: Calculate the moles of ethanoic acid after the addition of NaOH (1 mark)

When OH- ions are added to the buffer, they react with hydrogen ions from the dissociated acid molecules.

CH₃COOH(aq) ⇌ CH₃COO⁻ (aq) + H⁺(aq)

H⁺(aq) + OH⁻ (aq) → H₂O(l)

The mole ratio of H⁺ : OH- = 1:1

So moles of H⁺ ions reacting = 0.015 mol = moles of ethanoic acid molecules dissociated.

Ethanoic acid molecules, therefore, decrease by the same number of moles of base added.

Moles of ethanoic acid = 0.0375 – 0.015 = 0.0225 mol

 

Step 3: Calculate the new moles of ethanoate ions (1 mark)

More ethanoate ions are made is made when OH⁻ ions are added. The equilibrium reaction shifts to the right as H⁺ ions are used up, producing more ethanoate ions.
Mole ratio of CH₃COO⁻ : H⁺ = 1:1 from equation 1
Moles of ethanoate ions = 0.05 + 0.015 = 0.065 mol

 

Step 4: Calculate the H⁺ ion concentration using Ka (1 mark)

Rearrange and substitute in values to find [H⁺]

 

Step 5: Calculate pH (1 mark)

 

Buffer Action in Blood

Human blood is kept at a pH between 7.35 and 7.45 by the buffer action of carbonic acid (H₂CO₃) and bicarbonate anions (HCO₃⁻ ). Two equilibriums are set up:

H₂CO₃ (aq) ⇌ HCO₃⁻ (aq) + H⁺ (aq)

H₂CO₃ (aq) ⇌ H₂O (l) + CO₂ (aq)

 

This is how the buffer system in blood works:

  • If [H⁺] rises – Excess H⁺ reacts with HCO₃⁻ ions causing the first equilibrium to shift to the left. As a result [H⁺] stays close to its original value so that blood pH does not fall.
  • If [H⁺] falls – More H₂CO₃⁻ molecules dissociate causing the first equilibrium to shift to the right and more H⁺ to form. As a result [H⁺] stays close to its original value so that blood pH does not rise.

CO₂ and hence H₂CO₃⁻ concentrations are regulated by respiration whilst HCO₃⁻ concentrations are regulated by the kidneys, so that any excess HCO₃⁻ gets excreted in urine.

 

Basic Buffer Solutions

Basic Buffers

Basic buffers have a pH greater than 7. They are made by adding a weak base to its salt. For example, ammonia solution and ammonium chloride act as a basic buffer.

The salt fully dissociates:

NH₄Cl(aq) → NH₄⁺(aq) + Cl (aq)

The ammonia solution partially dissociates:

NH₃(aq) + H₂O(l) ⇌ NH₄⁺(aq) + OH (aq)

The buffer solution contains lots of undissociated base molecules and lots of salt ions of the base from the salt solution, and enough OH⁻ ions so that the solution is basic.

 

Adding an Acid to a Basic Buffer

When H⁺ ions are added to the basic buffer, they combine with OHions released when the ammonia molecules dissociate. The equilibrium shifts to the right to replace the OH  ions.

As a result:

  • The amount of undissociated ammonia decreases. As the position of equilibrium shifts, more undissociated ammonia is dissociated to replace the OH⁻ ions
  • The amount of ammonium ions increases. As more undissociated ammonia is dissociated to replace the OH⁻ ions, more ammonium ions are produced.
  • The pH stays more or less the same. The extra H⁺ added immediately combine with the OH⁻ ions in solution, which are quickly replenished as the position of equilibrium shifts to the right.

 

Adding a Base to a Basic Buffer

When OH⁻ ions are added to the basic buffer, they combine with NH₄⁺ ions from the salt, to make more undissociated ammonia molecules.

NH₄⁺ (aq) + OH⁻ (aq) → NH₃ (aq) + H₂O(l)

As a result:

  • The amount of ammonium ions decreases. Excess ammonium ions combine with the extra OH⁻ to form undissociated ammonia.
  • The amount of undissociated ammonia increases. As OH⁻ combines with ammonium ions, more undissociated ammonia forms.
  • The pH stays more or less the same. The extra OH⁺ added immediately combine with the ammonium and so the pH hardly changes.
→What are buffers and how do they work in a chemical reaction?

Buffers are solutions that can resist changes in pH, or the acidity or basicity, of a solution. They work by maintaining a balance between the concentration of an acid and its conjugate base, or between a base and its conjugate acid. When an acid or base is added to a buffer solution, the buffer will neutralize some of the added acid or base, thus preventing drastic changes in pH.

→How is the buffer action of a solution related to the dissociation constant (Ka) of the acid used in the buffer?

The buffer action of a solution is related to the dissociation constant (Ka) of the acid used in the buffer. The dissociation constant of an acid indicates how easily the acid will dissociate into its ionic form in solution. A buffer with a high Ka value will have a strong buffer action, meaning that it can resist changes in pH better than a buffer with a low Ka value.

→What is the Henderson-Hasselbalch equation and how is it used to calculate the pH of a buffer solution?

The Henderson-Hasselbalch equation is a mathematical expression used to calculate the pH of a buffer solution. The equation uses the dissociation constant (Ka) of the acid and the ratio of the concentration of the conjugate base to the concentration of the acid in the buffer solution. By using this equation, it is possible to determine the pH of a buffer solution and predict how it will respond to the addition of an acid or base.

→How can a buffer solution be prepared in a laboratory?

A buffer solution can be prepared in a laboratory by mixing a weak acid and its conjugate base, or a weak base and its conjugate acid, in the appropriate ratio. The concentration of the components of the buffer solution should be such that the pH of the solution falls within the range that is desired. Additionally, the pH of the buffer solution can be adjusted by adding small amounts of acid or base to achieve the desired pH.

→Why are buffer solutions important in biological systems?

Buffer solutions are important in biological systems because they help to maintain the pH of the environment. Many biological processes, including metabolic reactions, enzyme activity, and transport processes, are highly dependent on a stable pH. By preventing drastic changes in pH, buffer solutions help to ensure that these processes can occur smoothly and efficiently, and maintain the overall health and function of the organism.

Still got a question? Leave a comment

Leave a comment

Post as “Anonymous”